H3 C CR16000 Series Router CR16006-F

物品

CR16006-F

CR16010-F

CR16010H-F

CR16018-F

MPU slots

2

2

2

2

Line card slots

4

8

8

16

機殼

Integrated chassis, which can be installed in a 19-inch rack

Independent switch fabrics

4

4

5

5

Max Forwarding Capacity

1.6 tbps

6.4 tbps

12.8tbps

25.6tbps

Bi-direction Forwarding Capacity/slot

英鎊400

英鎊800

1.6 tbps

1.6T bps

Power module system

Support for 4 power modules (AC or DC) and N+M redundancy

Support for 6 power modules (AC or DC) and N+M redundancy

Support for 8 power modules (AC or DC) and N+M redundancy

Support for 16 power modules (AC or DC) and N+M redundancy

Dimensions (H × W × D)

353 × 440 × 660 mm (13.90 × 17.33 × 25.99 in), 8 RU

931 × 440 × 660 mm (34.89 × 17.32 × 25.98 in), 21 RU

931 × 440 × 640 mm (36.66× 17.32 × 25.98 in), 21 RU

1687 × 440 × 640 mm (66.42 × 17.32 × 25.98 in), 38 RU

Unicast routing

IPv4/IPv6 dual stack

Static routing, RIP, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP-4, and BGP4+

VRRP and VRRPv3

IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, traceroute IPv6, socket IPv6, static IPv6 DNS, specifying an IPv6 DNS server, and TFTP IPv6 client

IPv4 to IPv6 transition technologies

ICMPv6 MIB, UDP6 MIB, TCP6 MIB, and IPv6 MIB, etc.

ECMP

Policy-based routing

Routing policies

Tunneling technologies, such as GRE

IP FRR

Multicast

PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, anycast-RP, etc.

IGMP V1/V2/V3 and IGMP Snooping v1/2/3

PIM6-DM, PIM6-SM, and PIM6-SSM

MLD V1/V2 and MLD Snooping v1

Multicast policies and multicast QoS

MPLS VPN

P/PE functions, compliant with the RFC 2547 bis standard

Three multi-AS MPLS VPN methods (Option1/Option2/Option3)

Hierarchy of PE (HoPE)

Multi-role host

Layer 2 MPLS VPN functions

MPLS TE FRR and LDP FRR

6PE and 6vPE

Distributed multicast VPNs

ACL-based traffic filtering for VPNs

MPLS ping and MPLS traceroute

L2VPN access to L3VPN

QinQ access to VPLS

BRAS

Remote AAA based on RADIUS/TACACS+ protocol

iTA

Unified access authentication for large numbers of wired and wireless users

Mobility and once-for-all authentication for wireless terminals

BRAS IRF routing stateful failover

PPPoE, PPPoEoVLAN, and PPPoEoQ

Layer 2 Portal, Layer 3 Portal, and QinQ Portal access authentication

IPoE, IPoEoVLAN, IPoEoQ, DHCP, and unknown IP address access authentication

VPN access authentication

L2TP

ACL

IPv4/IPv6 standard ACL and extended ACL

Layer 2/Layer 3/Layer 4-based ACL

Ingress/Egress ACL

QoS

Hierarchical QoS (HQoS) and queue scheduling mechanisms including PQ, WFQ, and CBWFQ

Traffic shaping

TD/WRED

Priority marking/remarking

802.1p, TOS, DSCP, and EXP priority mappings

Multicast QoS

Ethernet

802.1Q

802.1Q VLAN Trunk

QinQ

802.3d (STP)/802.3w (RSTP)/802.3s (MSTP)

IEEE 802.3ad (link aggregation), static port aggregation, and inter-card link aggregation

Port mirroring and flow mirroring

Virtualization

Virtualizes multiple physical devices into a virtual fabric, manages devices and device forwarding on a unified interface, and supports multi-chassis link aggregation

Network traffic analysis

NetStream data export in v5/v8/v9

Traffic sampling and accounting

Multiple log hosts

Hardware-based network traffic analysis

IPv4/IPv6/MPLS traffic analysis

Port-based inbound and outbound traffic analysis

Flow monitor to monitor illegitimate traffic flows

可用性

1+1 redundancy backup for critical components including the MPUs, switching fabric modules, power supplies, and fans

Passive design for the backplane to prevent single point of failure

Hot swapping for all components

NSF, NSR, and GR

IP TRUNK, MP, and ETH port aggregation

PW redundancy, Ethernet OAM, and Y.1731

BFD

安全

Firewall

Hierarchical user management

Password protection

AAA

SSHv2 providing secure encrypted channel for user login

Standard and extended ACLs for packet filtering to prevent network attacks

Preventing attacks by using ARP packets, unknown multicast packets, broadcast packets, unknown unicast packets, local subnet route scanning packets, packets whose TTL is 1, and other protocol packets

URPF for preventing network attacks using source address spoofing

OSPF, RIPv2 and BGPv4 plain text authentication and MD5 authentication

SNMPv3

System management

In-band and out-of-band management

Command line configuration through Console/AUX Modem/Telnet/SSH2.0

File download/upload management through FTP, TFTP, Xmodem, and SFTP

SNMPv1/v2/v3

RMONv1/v2, supporting 1, 2, 3 or 9 groups

NTP

NQA

Failure alarm and automatic recovery

Data logs

ICMP

Syslog

Traceroute

Multiple user-line Telnet access