Nous fournissons aux clients divers produits de communication à des prix raisonnables et des produits et services de haute qualité
Part Number
|
02354LMC
|
Modelo
|
CE6863H-48S6CQ
|
Descripción
|
CE6863H-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)
|
Other part numbers
|
02354LMA (CE6863H-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, without fan and power modules)) 02354LMB (CE6863H-48S6CQ switch
(48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side intake)) |
Installation Type
|
Cabinet installation
|
Depth [mm]
|
420.0 mm
|
Chassis height [U]
|
1 |
Wide [mm]
|
442.0 mm
|
Height [mm]
|
43.6 mm
|
Weight with packaging [kg(lb)]
|
8.95 kg (19.73 lb)
|
Weight without packaging [kg(lb)]
|
5.7 kg (12.57 lb) (excluding optical modules, power modules, and fan modules)
|
Maximum power consumption [W]
|
384 W
|
Typical power consumption [W]
|
226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 261 W
(100% throughput, short-distance optical modules on all ports, dual power modules) |
Static power consumption [W]
|
167 W
|
Heat dissipation mode
|
Air cooling
|
Maximum heat dissipation [BTU/hour]
|
1310 BTU/hour
|
Typical heat dissipation [BTU/hour]
|
- 771 BTU/hour (100% traffic load, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power
modules) - 891 BTU/hour (100% traffic load, short-distance optical modules on all ports, dual power modules) |
Static heat dissipation [BTU/hour]
|
570 BTU/hour
|
Power supply mode
|
AC,DC,HVDC
|
Rated input voltage [V]
|
Rated AC input voltage range: 100 V AC to 240 V AC; 50/60 Hz Rated –48 V DC input voltage range: –48 V DC to –60 V DC Rated input
voltage range for 600 W AC & 240 V DC: 240 V DC Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC |
Input voltage range [V]
|
Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz Maximum –48 V DC input voltage range: –38.4 V DC to –72 V DC
Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC to 290 V DC Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC |
Maximum input current [A]
|
600 W AC&240 V DC power module (PAC600S12 series): - 8 A (100 V AC to 240 V AC) - 4 A (240 V DC) 1000 W DC power module
(PDC1000S12 series): 30 A (–48 V DC to –60 V DC) 1200 W high-voltage DC power module (PHD1K2S12 series): 8 A |
Rated output power [W]
|
600 W (AC&240 V HVDC) 1000 W (–48 V DC) 1200 W (380 V HVDC)
|
Memory
|
DRAM: 4 GB
|
NOR Flash
|
64 MB
|
NAND Flash
|
4 GB
|
USB
|
It can be used for log backup and USB-based deployment. This function is reserved.
|
Console port
|
RJ45
|
Downlink Service interface
|
48*25GE SFP28 Note: 1. 25GE ports can be used as 10GE ports. When working in GE mode. ports 1 to 8, 9 to 12, 13 to 16, 17 to 24,
25 to 28, 29 to 36, 37 to 44, and 45 to 48 form different groups. When the port mode GE command is run on any port in a group, all the ports in the group are configured to work at the rate of 1 Gbit/s. In this case, the ports can go Up only after GE media are installed. If a medium with a different rate is installed on a port, the port goes Down. 2. 10GE LRM/80 km linear optical modules are not supported. 3. 25GE 1 m copper cables and 10GE 1 m/3 m/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 25GE copper cables can only be used on M-LAG peer-link ports. |
Uplink Service interface
|
6*100GE QSFP28 Note: 1. Each 100GE QSFP28 port can be used as a 40GE port. 2. A 100GE QSFP28 port cannot be split into 4x25GE and
4x10GE ports. 3. 100GE and 40GE 1 m/3 m/5 m copper cables are supported, and auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on M-LAG peer-link ports. When 100GE 3 m/5 m copper cables are used on such ports, these cables must work in the RS FEC mode. If they work in the non-RS FEC mode, the ports are in error-down state. |
Service port supporting the stack function
|
Reserved function. This function is not enabled.
|
RTC
|
Supported
|
Switching capacity [bps,bit/s]
|
To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
|
Redundant fans
|
The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of
time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Redundant power supply
|
1+1 backup
|
Number of power modules
|
2 |
Power supply surge protection
|
AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common
mode and 2 kV in differential mode |
Types of fans
|
Pluggable
|
Number of fans
|
4 |
Airflow direction
|
Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules
|
Storage temperature [°C(°F)]
|
-40ºC to +70ºC (-40°F to +158°F)
|
Long-term operating temperature [°C(°F)]
|
0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) Note: When the altitude is 1800–5000 m (5096–16404 ft.), the
highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage relative humidity [RH]
|
5% to 95% RH, non-condensing
|
Long-term operating relative humidity [RH]
|
5% RH to 95% RH, non-condensing
|
Storage altitude [m(ft.)]
|
<000000>le; 5000 m (16404 ft.)
|
Long-term operating altitude [m(ft.)]
|
<000000>le; 5000 m (16404 ft.)
|
MTBF [year]
|
47.81 años
|
MTTR [hour]
|
1.95 horas
|
Noise at high temperature (40°C, sound pressure)
|
- Front-to-back airflow: < 75 dB(A) - Back-to-front airflow: < 74 dB(A)
|
Noise at normal temperature (27°C, sound pressure)
|
- Front-to-back airflow: < 58 dB(A) - Back-to-front airflow: < 57 dB(A)
|
Availability
|
0.9999962836
|
1. Sistema de cadena de suministro de mesa y ancho
Hemos establecido un sistema de cadena de suministro perfecto para proporcionar una amplia gama de productos con calidad confiable y precio razonable.
2. Precio competitivo
Garantizamos el precio más competitivo. Recordatorio cálido aquí, la configuración del equipo de telecomunicaciones es bastante diferente, el precio se muestra
3. Soluciones de pago seguras y fáciles
Admitimos una variedad de métodos de pago, como T/T, tarjeta de crédito, etc.
4. Excelentes servicios de preventa y posventa
Proporcionar a los clientes un servicio profesional de pre-venta, así como servicios técnicos de posventa.
5. Más de 20 años de experiencia en la industria
Hemos estado involucrados en esta industria por más de 20 años, tenemos una rica experiencia en la industria.
6. Entrega y envío rápidos
Entrega rápida, profesional y confiable.
P: ¿Qué hay de sus productos principales?
R: Nuestras líneas de productos incluyen conmutadores, enrutadores, OLT y SDH. Módulos de red, tarjetas de interfaz, firewalls de seguridad, puntos de acceso inalámbricos, etc.
Courriel:
Lilicheng0510@163.com
FLAT / RM P, 4 / F, Lladro Center, 72 Hoi Yuen Road, Kwun Tong, Hong Kong, Chine