نحن نوفر للعملاء العديد من منتجات الاتصالات بأسعار معقولة ومنتجات وخدمات عالية الجودة
Part Number
|
02354LMC
|
Modello
|
CE6863H-48S6CQ
|
Descrizione
|
CE6863H-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)
|
Other part numbers
|
02354LMA (CE6863H-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, without fan and power modules)) 02354LMB (CE6863H-48S6CQ switch
(48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side intake)) |
Installation Type
|
Cabinet installation
|
Profondità [mm]
|
mm420.0
|
Altezza telaio [U]
|
1 |
Largo [mm]
|
mm442.0
|
Altezza [mm]
|
mm43.6
|
Peso con imballaggio [kg(lb)]
|
8.95 kg (19.73 lb)
|
Peso senza imballaggio [kg(lb)]
|
5.7 kg (12.57 lb) (excluding optical modules, power modules, and fan modules)
|
Consumo energetico massimo [W]
|
384 W
|
Consumo energetico tipico [W]
|
226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 261 W
(100% throughput, short-distance optical modules on all ports, dual power modules) |
Consumo di potenza statica [W]
|
167 W
|
Modalità di dissipazione del calore
|
Air cooling
|
Dissipazione massima del calore [BTU/ora]
|
1310 BTU/hour
|
Dissipazione del calore tipica [BTU/ora]
|
- 771 BTU/hour (100% traffic load, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power
modules) - 891 BTU/hour (100% traffic load, short-distance optical modules on all ports, dual power modules) |
Static heat dissipation [BTU/hour]
|
570 BTU/hour
|
Modalità di alimentazione
|
AC,DC,HVDC
|
Tensione di ingresso nominale [V]
|
Rated AC input voltage range: 100 V AC to 240 V AC; 50/60 Hz Rated –48 V DC input voltage range: –48 V CC a –60 V DC Rated input
voltage range for 600 W AC & 240 V DC: 240 V DC Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC |
Intervallo di tensione di ingresso [V]
|
Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz Maximum –48 V DC input voltage range: –38.4 V DC to –72 V DC
Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC to 290 V DC Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC |
Corrente massima di ingresso [A]
|
600 W AC&240 V DC power module (PAC600S12 series): - 8 A (100 V AC to 240 V AC) - 4 A (240 V DC) 1000 W DC power module
(PDC1000S12 series): 30 A (–48 V CC a –60 V DC) 1200 W high-voltage DC power module (PHD1K2S12 series): 8 A |
Rated output power [W]
|
600 W (AC&240 V HVDC) 1000 W (–48 V DC) 1200 W (380 V HVDC)
|
Memoria
|
DRAM: 4 GB
|
NOR Flash
|
64 MB
|
NAND Flash
|
4 GB
|
USB
|
It can be used for log backup and USB-based deployment. This function is reserved.
|
Porta della console
|
RJ45
|
Downlink Service interface
|
48*25GE SFP28 Note: 1. 25GE ports can be used as 10GE ports. When working in GE mode. ports 1 to 8, 9 to 12, 13 to 16, 17 to 24,
25 to 28, 29 to 36, 37 to 44, and 45 to 48 form different groups. When the port mode GE command is run on any port in a group, all the ports in the group are configured to work at the rate of 1 Gbit/s. In this case, the ports can go Up only after GE media are installed. If a medium with a different rate is installed on a port, the port goes Down. 2. 10GE LRM/80 km linear optical modules are not supported. 3. 25GE 1 m copper cables and 10GE 1 m/3 m/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 25GE copper cables can only be used on M-LAG peer-link ports. |
Uplink Service interface
|
6*100GE QSFP28 Note: 1. Each 100GE QSFP28 port can be used as a 40GE port. 2. A 100GE QSFP28 port cannot be split into 4x25GE and
4x10GE ports. 3. 100GE and 40GE 1 m/3 m/5 m copper cables are supported, and auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on M-LAG peer-link ports. When 100GE 3 m/5 m copper cables are used on such ports, these cables must work in the RS FEC mode. If they work in the non-RS FEC mode, the ports are in error-down state. |
Service port supporting the stack function
|
Reserved function. This function is not enabled.
|
RTC
|
Supportato
|
Switching capacity [bps,bit/s]
|
To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
|
Redundant fans
|
The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of
time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Alimentazione ridondante
|
1+1 backup
|
Number of power modules
|
2 |
Protezione contro le sovratensioni dell&39;alimentazione
|
AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common
mode and 2 kV in differential mode |
Tipi di ventilatori
|
Collegabile
|
Number of fans
|
4 |
Direzione del flusso d&39;aria
|
Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules
|
Temperatura di conservazione [°C(°F)]
|
-40ºDa C a +70ºC (-40°Da F a +158°F)
|
Temperatura di esercizio a lungo termine [°C(°F)]
|
0°Da C a 40°C (32°Da F a 104°F) at an altitude of 0–1800 m (0–5906 ft.) Note: When the altitude is 1800–5000 metri (5096–16404 ft.), the
highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage relative humidity [RH]
|
5% to 95% RH, non-condensing
|
Umidità relativa di funzionamento a lungo termine [RH]
|
5% RH to 95% RH, non-condensing
|
Altitudine di stoccaggio [m(ft.)]
|
<000000>le; 5000 m (16404 ft.)
|
Altitudine operativa a lungo termine [m(ft.)]
|
<000000>le; 5000 m (16404 ft.)
|
MTBF [anno]
|
anni47.81
|
MTTR [ora]
|
ore1.95
|
Noise at high temperature (40°C, sound pressure)
|
- Front-to-back airflow: < 75 dB(A) - Back-to-front airflow: < 74 dB(A)
|
Noise at normal temperature (27°C, sound pressure)
|
- Front-to-back airflow: < 58 dB(A) - Back-to-front airflow: < 57 dB(A)
|
Disponibilità
|
0.9999962836
|
1.Tabella e sistema di catena di fornitura ampia
Abbiamo creato un sistema di filiera perfetto per offrire un&39;ampia gamma di prodotti di qualità affidabile e a prezzi ragionevoli.
2. Prezzo competitivo
Garantiamo il prezzo più competitivo. Promemoria caldi qui, la configurazione delle apparecchiature di telecomunicazione è piuttosto diversa, il prezzo mostra
3.Soluzioni di pagamento sicure e facili
Supportiamo una varietà di metodi di pagamento, come T/T, carta di credito, ecc.
4.Forti servizi pre-vendita e post-vendita
Per fornire ai clienti un servizio pre-vendita professionale, nonché servizi tecnici post-vendita
5. Oltre 20 anni di esperienza nel settore
Siamo impegnati in questo settore da più di 20 anni e vantiamo una vasta esperienza nel settore.
6. Consegna e spedizione veloci
Consegna veloce, professionale e affidabile.
D: E i vostri prodotti principali?
A: Le nostre linee di prodotti includono switch, router, OLT e SDH. Moduli di rete, schede di interfaccia, firewall di sicurezza, punti di accesso wireless ecc.
البريد الإلكتروني:
Lilicheng0510@163.com