Airengine5761-11EI 02354PDC 11ax Intrinsically Safe,Industrial-grade Wi-fi 6 Module,2+2 Dual Bands,External Antenna,Ble
Basic information about the AirEngine 5761-11EI
| Item | Details |
|---|---|
| Description | AirEngine5761-11EI(11ax intrinsically safe, industrial-grade Wi-Fi 6 module, 2+2 dual bands, external antenna, BLE) |
| Part Number | 02354PDC |
| Model | AirEngine 5761-11EI |
| subseries | AirEngine 5700 |
| First supported version | V200R022C00 |
|
1 |
Antenna port |
2 |
GE (optical ports) |
|
3 |
GE (electrical ports) |
4 |
RS485 |
|
5 |
DC 12V |
- |
- |
Ports on the AirEngine 5761-11EI
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| GE0 | SFP | Ethernet optical port, supporting 1000 Mbit/s and working with a matching optical transceiver |
Optical module |
| GE1 | RJ45 | Ethernet electrical port, supporting 10/100/1000 Mbit/s auto-sensing and used to connect to the wired Ethernet |
Network cable |
| GE2 | RJ45 | Ethernet electrical port, supporting 10/100/1000 Mbit/s auto-sensing and used to connect to the wired Ethernet |
Network cable |
| GE3 | SFP | Ethernet optical port, supporting 1000 Mbit/s and working with a matching optical transceiver |
Optical module |
| DC 12V | Phoenix terminal block | 12 V DC power supply |
Power cable |
| RS485 | Phoenix terminal block | RS485 serial port |
Console cable |
| LED | Dual-row plug-in connector | Connects to an external indicator board to implement the extended indicator functions. |
Flat cable |
Technical Specifications
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | 45 mm x 200 mm x 200 mm (1.77 in. x 7.87 in. x 7.87 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 90 mm x 285 mm x 250 mm (3.54 in. x 11.22 in. x 9.84 in.) |
| Weight without packaging [kg(lb)] | 1.19 kg (2.62 lb) |
| Weight with packaging [kg(lb)] | 1.56 kg (3.44 lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 12.6 W |
| Maximum heat dissipation [BTU/hour] | 43 BTU/hour |
| Power supply mode | DC adapter |
| Number of power modules | 1 |
| Rated input voltage [V] | 12 V mining explosion-proof and intrinsically safe DC regulated power supply (overcurrent protection value ≥ 1.8 A) |
| Input voltage range [V] | 12 V ± 10% |
| Maximum PoE output power [W] | Not supported |
| Redundant power supply | Not supported |
| Types of fans | None |
| Number of fan modules | 0 |
| Maximum number of physical ports on the entire device |
GE (RJ45) x 2, 10M/100M/1000M auto-sensing GE optical (SFP) x 2 |
| Long-term operating temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| Antenna port surge protection [KA] | N/A |
| BLE | BLE4.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams |
Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | MCX |
| Antenna gain | Built-in BLE: 0 dBi |
| Maximum transmit power |
2.4G: 15 dBm/chain 5G: 15 dBm/chain (Each radio of the AP has two spatial streams, which correspond to four RF ports through the built-in power splitter. The preceding transmit power values are the transmit power of a single RF port after power splitting.) BLE: < 0 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 15 dBm/chain 5G: -10 dBm to 15 dBm/chain The preceding power ranges are the power values after power splitting by the built-in power splitter. Each radio corresponds to four ports. |
| MTBF [year] | 152 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| DC power supply description | In coal mine scenarios, it must be used with the specified mining explosion-proof and intrinsically safe power supply. |
1.Table And Wide Supply Chain System
We have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
2.Competitive Price
We ensure the most competitive price.Warm reminders here, telecommunications equipment configuration is quite different, the price show
3.Safe And Easy Payment Solutions
We support a variety of payment methods, such as T/T, credit card, et
4.Strong Pre-Sales And After-Sales Services
To provide customers with professional pre- sales service, as well as after-sales technical Services
5.More Than 20 Years Industry Experience
We have been engaged in this industry more than 20 years, we have rich industry experience.
Q: How about your main products?
A:Our product lines include Switches.Routers,OLTs,SDHs. Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
Q:Can we get free samples?
Q: What trade terms do you use ?
Q: How about your delivery time?
Q: Do you test all your goods?
Email: Lilicheng0510@163.com
We provide customers with various communication products at reasonable prices and high quality products and services
Flat/Rm P, 4/F, Lladro Centre, 72 Hoi Yuen Road, Kwun Tong, Hong Kong, China