|
AIR-AP2802I-K-K9 Specification
|
|
Software
|
* Unified Wireless Network Software Release 8.2.111.0 or later
* IOS®XE Software Release 16.3
|
|
Supported wireless LAN controllers
|
* 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst®6500
Series Switches, 5500 Series Wireless Controllers, Flex® 7500 Series Wireless Controllers, 8500 Series Wireless Controllers,
Virtual Wireless Controller
* Catalyst 3850 Series Switches, Catalyst 3650 Series Switches
* Mobility Express
|
|
802.11n version 2.0 (and related) capabilities
|
* 4x4 MIMO with three spatial streams
* Maximal ratio combining (MRC)
* 802.11n and 802.11a/g beamforming
* 20- and 40-MHz channels
* PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
* Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
* 802.11 dynamic frequency selection (DFS)
* Cyclic shift diversity (CSD) support
|
|
802.11ac Wave 1 capabilities
|
* 4x4 MIMO with three spatial streams
* MRC
* 802.11ac beamforming
* 20-, 40-, and 80-MHz channels
* PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
* Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
* 802.11 DFS
* CSD support
|
|
802.11ac Wave 2 capabilities
|
* 4x4 MU-MIMO with three spatial streams
* MRC
* 802.11ac beamforming
* 20-, 40-, 80, 160-MHz channels
* PHY data rates up to 5.2 Gbps
* Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
* 802.11 DFS
* CSD support
|
|
Integrated antenna
|
Flexible radio (either 2.4 GHz or 5 GHz)
* 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
* 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
* 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
|
|
External antenna (sold separately)
|
* 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
* offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios
|
|
Smart antenna connector
|
* Available on the 2802e Series access points only
* Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access
point
* Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio
|
|
Interfaces
|
* 2802I/E
2x100/1000BASE-T autosensing (RJ-45)
* Management console port (RJ-45)
* USB 2.0 (enabled via future software)
|
|
Indicators
|
* Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
|
Dimensions (W x L x H)
|
* Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
|
|
Weight
|
Aironet 2802i
* 3.53 lb (1.6 kg)
Aironet 2802e
* 4.6 lb (2.09 kg)
|
|
Input power requirements
|
* 802.3at PoE+, Universal PoE ( UPOE®)
* 802.3at power injector (AIR-PWRINJ6=)
|
|
Power draw
|
* 26W at the PSE with all features enabled except for the USB 2.0 port
* 30W at the PSE with the USB 2.0 port enabled
|
|
Environmental
|
Aironet 2802i
* Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
* Nonoperating (storage) altitude test: 25 C, 15,000 ft.
* Operating temperature: 32° to 104°F (0° to 40°C)
* Operating humidity: 10% to 90% (noncondensing)
* Operating altitude test: 40 C, 9843 ft.
Aironet 2802e
* Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
* Nonoperating (storage) altitude test: 25 C, 15,000 ft.
* Operating temperature: -4° to 122°F (-20° to 50°C)
* Operating humidity: 10% to 90% (noncondensing)
* Operating altitude test: 40 C, 9843 ft.
|
|
System memory
|
* 1024 MB DRAM
* 256 MB flash
|
