The S5700 series Ethernet switches (S5700 for short) are next-generation energy-saving switches developed by H W to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware Versatile Routing Platform (VRP) software, the S5700 provides a large switching capacity, high reliability (double power slots and hardware Ethernet OAM), and high-density GE ports to accommodate 10 Gbit/s upstream transmissions. It also supports Energy Efficient Ethernet (EEE) and iStack. The S5700 can be used in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals.
The S5700 is available in a lite (LI) series, a standard (SI) series, an enhanced (EI) series, and a hyper (HI) series.
Description | Part Number | Model | First Supported Version | Remarks |
---|---|---|---|---|
NE40E-X16A Integrated AC Chassis Components(2T,Including 6 Fan Tray) | 02351PJQ | CR5B0BKP1677 | V800R010C00 | - |
Figure 1 Appearance of the CR5B0BKP1677
Item | Specification |
---|---|
Cabinet installation standards | Can be installed in a standard 19" 1000 mm-deep cabinet, part number is 02115109(CR5B0N610E60) |
Dimensions without packaging (H x W x D) [mm(in.)] | 1778 mm x 442 mm x 946 mm (70.00 in. x 17.40 in. x 37.24 in.) (Dimensions of the chassis body together with cable trays and front and back attachments) |
Chassis height [U] | 40 U |
Weight without packaging (base configuration) [kg(lb)] | 176.1 kg (302.69 lb) |
Weight without packaging (full configuration) [kg(lb)] | [2T bundle] 453.3kg (999.34 lb) |
Typical power consumption [W] |
9040 W (fully configured with LPUF-480s) 12390 W (fully configured with LPUI-1Ts) 22450 W(fully configured with LPUI-2Ts) |
Typical heat dissipation [BTU/hour] |
29329.6 BTU/hour (fully configured with LPUF-480s) 40198.4 BTU/hour (fully configured with LPUI-1Ts) 72837.2 BTU/hour (fully configured with LPUI-2Ts) |
MTBF [year] | 22.33 year |
MTTR [hour] | 0.5 hour |
Availability | 0.9999974444 |
Power supply mode | AC built-in |
Maximum number of power chassis inputs | (4 channels/PEM)*4 PEM=(1 channels/PM)*4 PM*4 PEM=16 channels |
Rated input voltage [V] | 200 V to 240 V |
Input voltage range [V] | 180 V to 264 V |
Maximum input current [A] | 16 A/single-module |
Maximum input cable diameter [mm²] | Standard C19 cable |
Front-end circuit breaker/fuse [A] |
16 A/single-module [2T bundle] AC device: 16PMs, with a total of 16 channels of 16 A |
Noise at normal temperature (acoustic power) [dB(A)] | NEBS-compliance (< 78 dBA @ 27°C (80.6°F)) |
Number of slots | 22 |
Number of service board slots | 16 |
Switching capacity | 81.92Tbps(LPUI-2T) |
Redundant MPUs | 1:1 |
Redundant Switch fabrics | 3+1 |
Redundant power supply | [2T bundle] 9+1 |
Redundant fans | [2T bundle] 2 partitions; 3 assemblies/partition; each partition in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) |
Short-term operating temperature [°C(°F)] | -5°C to 55°C (23°F to 131°F) |
Restriction on the operating temperature variation rate [°C(°F)] | ≤ 30°C/hour (86°F/hour) |
Storage temperature [°C(°F)] | -40°C to 70°C (-40°F to 158°F) |
Long-term operating relative humidity [RH] | 5% RH to 85% RH, non-condensing |
Short-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
Long-term operating altitude [m(ft.)] | ≤ 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the device must decrease by 1°C [1.8°F] for every 220 m [721.78 ft.].) |
Storage altitude [m(ft.)] | Less than 5000 m (16404 ft.) |
Q: How about your main products?
Email: Lilicheng0510@163.com