● Model No.: S5731-S24P4X
● Size:43.6*420*420mm
● Port details: 24*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+, without power module
● Place of Origin: Guangdong, China
● Place of use: LACP, QoS, SNMP, Stackable, VLAN Support
● PoE: Supported
● Warranty: 1years
● MOQ: 1 pieces
Application scenarios
1. Mixed access to office areas for large and medium-sized enterprises: This is its most core application scenario. In office areas such as office buildings, government agencies, hospitals, etc., there are a large number of IP phones, computers, and printers that need to be connected to the network, and IP phones usually require PoE power supply. 24 Gigabit PoE+ports can simultaneously power and transmit data to these devices without the need for additional power sockets for IP phones; Four 10 Gigabit uplink ports ensure unobstructed uploading of office traffic to the core network.
2. General education/university multimedia classroom access: In multimedia classrooms, electronic reading rooms, and other scenarios, it is necessary to connect teaching terminals, electronic whiteboards, projectors, teaching APs, and other equipment. PoE+power supply provides power to APs and some terminals, with 24 ports to meet the requirements of medium density access. The deployment is simple, safe, and reliable.
3. Medium to large-scale Wi Fi AP coverage: As an access switch for the campus wireless network, it provides PoE+power supply (maximum 30W per port) and gigabit data forwarding for a large number of ceiling mounted APs or panel APs. Four 10 Gigabit SFP+uplink ports can be used for fiber optic connection to the core, eliminating bandwidth bottlenecks and suitable for deployment in scenarios that require large-scale wireless coverage, such as hotels, shopping malls, schools, hospitals, etc.
4. Video surveillance aggregation node: In the monitoring systems of parks and buildings, it can be used to access high-definition IP cameras. PoE+power supply meets the power supply needs of most fixed cameras, with 24 ports capable of aggregating traffic from multiple monitoring points and 4 10G optical ports for uploading to the monitoring center.
5. Network core for small and medium-sized enterprises: For small and medium-sized enterprises with around 100 employees, it can serve as a core switch, connecting office terminals, servers AP、 Various devices such as cameras can be used for multiple purposes, simplifying network architecture
Introduction
1. Basic network and PoE enhancement capability Support 64K MAC address table, with automatic MAC address learning/aging, static/dynamic/black hole MAC table entries, and source MAC filtering capabilities; Supports 4K VLAN, compatible with Guest VLAN, Voice VLAN, GVRP, and MUX VLAN, and can flexibly partition VLANs based on multiple dimensions; Support LACP link aggregation, port mirroring, port isolation, and storm suppression to ensure link reliability; PoE Enhancement: Supports PoE port priority configuration, timed power supply, power management, PoE status monitoring, and can flexibly adapt to different power terminals to improve power supply stability and energy efficiency.
2. Three layers and protocol characteristics Complete three-layer routing capability, supporting IPv4/IPv6 dual stack, compatible with mainstream routing protocols such as OSPF, IS-IS, BGP, RIP, etc; Support VRRP and VGMP gateway redundancy, BFD millisecond level fast fault detection, IGMP Snooping and PIM multicast protocols, and adapt to high bandwidth services such as video surveillance and virtualization; Support iStack intelligent stacking, allowing multiple devices to be virtualized into a single logical device, simplifying networking and centralized management; Supports SVF super virtual switching and can be used as an SVF client to achieve zero configuration plug and play, reducing operational complexity.
3. Safety and Management Security protection: supports ACL, DHCP Snooping, ARP security, ARP/DoS attack prevention, IP-MAC port triple binding, and builds access layer security barriers; Management method: Supports SNMP, Web UI, CLI command line RMON, Compatible with Huawei iMaster NCE Campus management platform, achieving visual operation and maintenance; Compatible with standard OpenFlow protocol, supports smooth evolution of SDN architecture, and adapts to future network upgrade needs.
Detailed description
|
Item |
Description |
|---|---|
|
Memory (RAM) |
2 GB |
|
Flash |
1 GB in total. To view the available flash memory size, run the display version command. |
|
Mean time between failures (MTBF) |
57.21 years |
|
Availability |
> 0.99999 |
|
Service port surge protection |
Common mode: ±6 kV |
|
Power supply surge protection |
|
|
Dimensions (H x W x D) |
|
|
Weight (with packaging) |
8.6 kg (18.96 lb) |
|
Stack ports |
10GE SFP+ ports on the front panel |
|
RTC |
Supported |
|
RPS |
Not supported |
|
PoE |
Supported |
|
Rated voltage range |
|
|
Maximum voltage range |
|
|
Maximum power consumption (100% throughput, full speed of fans) |
|
|
Typical power consumption (30% of traffic load, tested according to ATIS standard) |
95 W |
|
Operating temperature |
-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). |
|
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
|
Noise under normal temperature (27°C, sound power) |
< 62.3 dB(A) |
|
Relative humidity |
5% to 95%, noncondensing |
|
Operating altitude |
0-5000 m (0-16404 ft.) |
|
Certification |
|
|
Part number |
02353AHX 02353AHX-001 02353AHX-003 |
Email: Lilicheng0510@163.com