Network Switch S5735-S48P4X Industrial Network Switch with 48 ports
● Model No.: S5731-S48T4X
● Size:43.6*420*440mm
● Port details: 48*10/100/1000BASE-T ports,4*10GE SFP+ ports,without power module
● Place of Origin: Guangdong, China
● Place of use: LACP, QoS, SNMP, Stackable, VLAN Support
● PoE: Not Supported
● Warranty: 1years
● MOQ: 1 pieces
Application scenarios
1.Gigabit access in large and medium-sized enterprise parks: This is its most core application scenario. It can serve as an edge access device for the network, providing stable gigabit to desktop access for a large number of wired terminals (such as office computers, printers) in areas such as offices, canteens, and factories. With four 10 Gigabit uplink optical ports, it can converge data from 48 Gigabit ports without blocking and connect to the core switch upwards
2.Large scale PoE power deployment: This switch has a PoE budget of up to 1440W, making it ideal for scenarios that require powering and networking a large number of devices simultaneously
3.Aggregation or core of small and medium-sized networks: For moderately sized companies or branch offices, it can serve as a network aggregation switch, aggregating access switch data from downstairs or nearby areas, and then uploading it to the core layer through 10G optical ports. In small networks lacking professional core equipment, it can fully fulfill the role of a core switch with its powerful three-layer routing capabilities (supporting protocols such as OSPF and BGP)
4.High reliability and easy to operate environment: It supports stackability (up to 9 units) and can virtualize multiple switches into one, simplifying management and scalability. At the same time, the power module supports 1+1 redundant backup (requiring the installation of two power modules), combined with the Ethernet Ring Protection Protocol (ERPS), which can provide link protection for businesses that require high reliability, such as finance and healthcare
Introduction
1. Strong PoE power supply capability
Supports 370W full load PoE output and can simultaneously power 48 port terminals (such as Wi Fi 6 AP, HD IPC) without the need for additional wiring, simplifying network topology.
2. High performance and scalability
4 10G SFP+uplink ports, providing high bandwidth uplink connection; Supports 2.5Gbps port rate expansion (partial versions) to meet the access requirements of next-generation Wi Fi 6/6E APs.
3. Intelligent operation and maintenance
Support SVF virtual architecture, plug and play, iMaster NCE cloud management, reducing large-scale network deployment and operation costs.
Detailed description
|
Item |
Description |
|---|---|
|
Memory (RAM) |
1 GB |
|
Flash |
512 MB in total. To view the available flash memory size, run the display version command. |
|
Mean time between failures (MTBF) |
54.88 years |
|
Availability |
> 0.99999 |
|
Service port surge protection |
Common mode: ±7 kV |
|
Power supply surge protection |
|
|
Dimensions (H x W x D) |
|
|
Weight (with packaging) |
7.64 kg (16.84 lb) |
|
Stack ports |
Any 10/100/1000BASE-T ports or 10GE SFP+ ports (applicable in V200R019C10 and later versions) |
|
RTC |
Supported |
|
RPS |
Not supported |
|
PoE |
Supported |
|
Rated voltage range |
|
|
Maximum voltage range |
|
|
Maximum power consumption (100% throughput, full speed of fans) |
|
|
Typical power consumption (30% of traffic load)
|
59 W |
|
Operating temperature |
-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). |
|
Short-term operating temperature |
-5°C to +55°C (23°F to 131°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met:
The equipment cannot start when the temperature is lower than 0°C (32°F). The maximum distance of optical modules used in these conditions cannot exceed 10 km. |
|
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
|
Noise under normal temperature (27°C, sound power) |
< 58.9 dB(A) |
|
Relative humidity |
5% to 95%, noncondensing |
|
Operating altitude |
0-5000 m (0-16404 ft.) |
|
Certification |
|
|
Part number |
98010943 |
Email: Lilicheng0510@163.com
We provide customers with various communication products at reasonable prices and high quality products and services
Flat/Rm P, 4/F, Lladro Centre, 72 Hoi Yuen Road, Kwun Tong, Hong Kong, China