Network Switch S5735-S48T4XE-XA-V2 Ethernet Switch With 4*10GE SFP+ ports
● Model No.:S5735-S48T4XE-XA-V2
● Size:185.0 mm x 650.0 mm x 550.0 mm
● Port details: 48*10/100/1000BASE-T ports, 4*10GE SFP+ ports, 2*12GE stack ports, dual built-in AC power
● Place of Origin: Guangdong, China
● exchange capacity:224 Gbps / 520 Gbps
●cooling method:Smart plug-in fan, supporting speed adjustment and alarm, suitable for high-temperature environments up to 50°CSmart plug-in fan, supporting speed adjustment and alarm, suitable for high-temperature environments up to 50°C
● Warranty: 1years
● MOQ: 1 pieces
Application scenarios
1. Enterprise Campus Access Layer: 48-port Gigabit access for office computers, IP phones, APs, and other terminals, with 4-port 10 Gigabit uplink to the core switch, forming a high-density, highly reliable access network.
2. Security Monitoring Aggregation: Connect high-definition IP cameras, ensuring stable video stream transmission via multicast and QoS, with 10G uplink to the monitoring center.
3. SME Core / Aggregation: Serving as the core network for small enterprises, it supports multiple services such as data, voice, and video, meeting the interconnection needs of branch offices.
4. Data Center Access: Provides gigabit access for servers and storage devices, with 10-gigabit uplink to the data center core, suitable for deployment in small to medium-sized data centers.
Introduction
1. High performance forwarding and flexible networking
Full line speed layer 2/3 forwarding, non blocking architecture, ensuring stable and concurrent transmission of multiple services.
Support iStack intelligent stacking, virtualizing multiple devices into one, simplifying management, expanding ports and bandwidth.
Support ERPS, Smart Link, RRPP and other ring network and link backup technologies to achieve millisecond level fault switching.
2. Enhance the three-layer routing capability
Supports complete three-layer protocols such as static routing, RIP, OSPF, IS-IS, BGP, etc.
Support VRRP virtual routing redundancy to ensure high gateway availability.
Mature IPv6 features, supporting IPv4/IPv6 dual stack, suitable for next-generation network upgrades.
3. Improve security and business controls
Access security: 802.1X, MAC address authentication, Portal authentication, dynamic issuance of VLAN/QoS/ACL policies.
Attack protection: defend against DoS attacks such as SYN Flood, Land, ICMP Flood, etc; Support DHCP Snooping, ARP security, IP Source Guard, etc. to prevent impersonation and deception.
Multicast service: Supports IGMP Snooping, PIM SM/SSM, and meets multicast scenarios such as high-definition video surveillance and video conferencing.
QoS scheduling: supports port speed limit, queue scheduling (SP/WRR/DRR), traffic shaping, and ensures priority transmission of critical services such as voice and video
Detailed description
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] |
Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 446.0 mm (1.72 in. x 17.40 in. x 17.56 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 185.0 mm x 650.0 mm x 550.0 mm (7.28 in. x 25.59 in. x 21.65 in.) |
| Chassis height [U] | 1 U |
| Chassis material | Metal |
| Weight without packaging [kg(lb)] | 4.39 kg (9.68 lb) |
| Weight with packaging [kg(lb)] | 6.82 kg (15.04 lb) |
| Typical power consumption [W] | 39.10 W |
| Typical heat dissipation [BTU/hour] | 133.41 BTU/hour |
| Maximum power consumption [W] | 53.74 W |
| Maximum heat dissipation [BTU/hour] | 183.37 BTU/hour |
| Static power consumption [W] | 18.45 W |
| MTBF [years] | 43.19 years |
| Availability | > 0.99999 |
| Noise at normal temperature (acoustic power) [dB(A)] | 41.9 dB(A) |
| Noise at normal temperature (acoustic pressure) [dB(A)] | 29.9 dB(A) |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 2 |
| Redundant power supply | Dual built-in power modules in 1+1 backup mode |
| Long-term operating temperature [°C(°F)] | -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.) |
| Restriction on the operating temperature variation rate [°C(°F)] |
When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). The operating temperature ranges from –5°C (23°F) to +45°C (113°F) when optical modules with transmission distances greater than or equal to 60 km are used. |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) |
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
| Power supply mode | AC built-in |
| Rated input voltage [V] |
|
| Input voltage range [V] |
|
| Maximum input current [A] | 4.0 A |
| Memory | 2 GB |
| Flash memory | Physical space: 1 GB |
| Console port | RJ45 |
| Eth Management port | RJ45 |
| USB | Supported |
| RTC | Not supported |
| RPS input | Not supported |
| Power supply surge protection [kV] | Differential mode: ±6 kV; common mode: ±6 kV |
| Ingress protection level (dustproof/waterproof) | IP20 |
| Types of fans | Built-in |
| Heat dissipation mode | Air cooling for heat dissipation, intelligent fan speed adjustment |
| Airflow direction | Air intake from left and front, air exhaustion from right |
| PoE | Not supported |
| Certification |
EMC certification Safety certification Manufacturing certification |
Email: Lilicheng0510@163.com
We provide customers with various communication products at reasonable prices and high quality products and services
Flat/Rm P, 4/F, Lladro Centre, 72 Hoi Yuen Road, Kwun Tong, Hong Kong, China