Specification
|
OptiXaccess EA5801S-FL16
|
Dimensions (H x W x D) (mm)
|
400 x 300 x 120
|
Weight
|
About 15kg
|
Power supply mode
|
• DC power supply
|
|
• AC power supply
|
Rated voltage
|
• DC power supply: –48 V to –60 V
|
|
• AC power supply: 100 V–240 V
|
Maximum input current
|
• DC power supply: 6 A
|
|
• AC power supply: 2.5 A
|
Protection rating
|
IP65
|
Surge protection level
|
• AC power port: 20 kA in difference and common modes
|
|
• DC power port: 10 kA in differential mode and 20 kA in common mode
|
Operating temperature
|
–40°C to +50°C (with solar radiation); minimum startup temperature: –25°C
|
Operating humidity
|
5% RH to 95% RH
|
Atmospheric pressure
|
70 kPa to 106 kPa
|
Altitude
|
• Below 4000 m
|
|
• NOTE
|
|
• The air density varies with the altitude, which affects the heat dissipation
|
|
• capability of devices. Therefore, the operating temperature of the device
|
|
• changes with the altitude.
|
System switching capacity
|
460 Gbit/s
|
MAC addresses
|
32767
|
Access ONT
|
2048
|
IPv4 routing table
|
8192
|
IPv6 routing table
|
4096
|
ARP table
|
16384
|
10GE/GE upstream ports
|
4
|
Service ports
|
16 Flex-PON
|
Power consumption
|
• Static Power Consumption:
|
|
DC power supply: 64 W
|
|
AC power supply: 65 W
|
|
• Typical Power Consumption:
|
|
DC power supply: 115 W
|
|
AC power supply: 120 W
|
|
• Maximum Power Consumption:
|
|
DC power supply: 132 W
|
|
AC power supply: 135 W
|
|
• NOTE
|
|
• The power consumption of the device is calculated based on the following conditions:
|
|
Static power consumption: 25°C, no optical module in any optical port, and no service running.
|
|
Typical power consumption: 25°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full
traffic. |
|
Maximum power consumption: 50°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full
traffic |
Email: Lilicheng0510@163.com