Airengine6761-21E 02353VUY (11ax Indoor,4+4 Dual Bands,Smart Antenna,Usb,Ble,Scan)
Basic information about the AirEngine 6761-21E
| Item | Details |
|---|---|
| Description | AirEngine6761-21E(11ax indoor,4+4 dual bands,smart antenna,USB,BLE,Scan) |
| Part Number | 02353VUY |
| Model | AirEngine 6761-21E |
| subseries | AirEngine 6700 |
| First supported version | V200R021C00 |
|
1 |
Security slot |
2 |
2.5GE/PoE_IN |
|
3 |
DC 48V |
4 |
USB |
|
5 |
SFP+ |
6 |
Antenna port |
Ports on the AirEngine 6761-21E
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 2.5GE/PoE_IN | RJ45 | 100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input. |
Network cable |
| SFP+ | SFP+ |
Ethernet optical port, supporting 1 Gbit/s or 10 Gbit/s auto-sensing and working with a matching optical module. It supports PoE input. When a PSE supplies power to the AP through this port, the matching hybrid cable and hybrid module must be used. |
Optical module |
| Antenna port | RP-SMA-K | Connects to an external antenna for transmitting and receiving service signals, and supports dual-band (2.4 GHz + 5 GHz) antennas. |
Antenna |
| DC 48V | DC connector | DC power port, used to connect to a 48 V power adapter. |
48 V DC power adapter |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. |
IoT module |
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x length: 220 mm x 53 mm (8.66 in. x 2.09 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 93 mm x 284 mm x 251 mm (3.66 in. x 11.18 in. x 9.88 in.) |
| Weight without packaging [kg(lb)] | 1.14 kg (2.51 lb) |
| Weight with packaging [kg(lb)] | 1.74 kg(lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 22.6 (excluding USB) |
| Maximum heat dissipation [BTU/hour] | 77.1 (without USB) |
| Power supply mode |
|
| Input voltage range [V] |
DC: 42.5 V to 57 V PoE: 802.3at/af |
| Service port surge protection [kV] |
PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Relationship between PoE and system power modules [W] | The AP can be powered by DC or PoE over an Ethernet cable or hybrid cable. The power supply modes do not have priorities and do not support hot backup. |
| Maximum number of physical ports on the entire device |
2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing 10GE (SFP+) x 1, 1000M/10GE auto-sensing Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are used, the optical port is preferentially for communication. |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| USB | USB 2.0 |
| BLE | BLE5.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams |
Radio 0 (2.4 GHz): 4x4 Radio 1 (5 GHz): 4x4 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | External antenna,SMA |
| Antenna gain | BLE:4dBi |
| Maximum transmit power |
2.4G: 26 dBm (Max) 5G: 26 dBm (Max) NOTE:
This is the MIMO total radio power, which is the same as: 2.4G: 20 dBm/chain (Max) 5G: 20 dBm/chain (Max) BLE: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 94 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3at power supply description |
Wi-Fi:
Wired network port: Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. |
| 802.3af power supply description |
Wi-Fi: The number of MIMO spatial streams decreases to 2x2 on the 2.4 GHz frequency band, the maximum combined power is 23 dBm, and the 5 GHz frequency band is unavailable. Wired network port:
Other ports: The USB port is unavailable. |
| DC power supply description | Either the 2.5GE electrical port or SFP+ optical port can be used for data communication. If both ports are connected, the optical port is preferentially used for communication. |
1.Table And Wide Supply Chain System
We have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
2.Competitive Price
We ensure the most competitive price.Warm reminders here, telecommunications equipment configuration is quite different, the price show
3.Safe And Easy Payment Solutions
We support a variety of payment methods, such as T/T, credit card, et
4.Strong Pre-Sales And After-Sales Services
To provide customers with professional pre- sales service, as well as after-sales technical Services
5.More Than 20 Years Industry Experience
We have been engaged in this industry more than 20 years, we have rich industry experience.
6.Fast Delivery And Shipping
Fast, professional and reliable delivery.
Q: How about your main products?
A:Our product lines include Switches.Routers,OLTs,SDHs. Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
Q:Can we get free samples?
Q: What trade terms do you use ?
Q: How about your delivery time?
Q: Do you test all your goods?
Email: Lilicheng0510@163.com
We provide customers with various communication products at reasonable prices and high quality products and services
Flat/Rm P, 4/F, Lladro Centre, 72 Hoi Yuen Road, Kwun Tong, Hong Kong, China