Item
|
Specification
|
Installation Type
|
Wall
|
Ceiling
|
|
Junction Box
|
|
Dimensions without packaging (H x W x D) [mm(in.)]
|
185 mm x 185 mm x 42 mm (7.28 in. x 7.28 in. x 1.65 in.)
|
Dimensions with packaging (H x W x D) [mm(in.)]
|
72 mm x 230 mm x 234 mm (2.83 in. x 9.06 in. x 9.21 in.)
|
Weight without packaging [kg(lb)]
|
0.73 kg (1.61 lb)
|
Weight with packaging [kg(lb)]
|
1.24 kg (2.73 lb)
|
Storage
|
NAND Flash 256 MB
|
Console port
|
BLE console
|
Maximum power consumption [W]
|
21.9 (excluding USB)
|
Maximum heat dissipation [BTU/hour]
|
71.0 BTU/hour
|
Power supply mode
|
PoE
|
PoE (hybrid cable)
|
|
DC adapter
|
|
Rated input voltage [V]
|
48 V
|
Input voltage range [V]
|
DC: 43.2 V to 57.6 V
|
PoE: 802.3bt/at/af
|
|
Service port surge protection
|
PoE port:
|
Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
|
|
Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
|
|
Maximum number of physical ports on the entire device
|
2.5GE (LC) optical port x 1, 2.5G/1G auto-sensing (The AP has a built-in BIDI optical module, which connects to an optical fiber
through the LC port. The wavelength on the AP side is TX 1310 nm/RX 1490 nm, with the transmit optical power of –9 dBm to –3 dBm and the receive optical power of –15 dBm to –3 dBm. The peer end must use an optical module with the wavelength of TX 1490 nm/RX 1310 nm and the matching power. It is recommended that the optical fiber routing distance be within 2 km.) |
2.5GE (RJ45) x 1, 100M/1000M/2500M auto-sensing
|
|
GE (RJ45) x 8, 10M/100M/1000M auto-sensing
|
|
Long-term operating temperature [°C(°F)]
|
0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases
by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
Storage temperature [°C(°F)]
|
–40°C to +70°C (–40°F to +158°F)
|
Long-term operating relative humidity [RH]
|
5% RH to 95% RH, non-condensing
|
Long-term operating altitude [m(ft.)]
|
–60 m to +5000 m (–196.85 ft to +16404.20 ft)
|
Atmospheric pressure [kPa]
|
53kPa - 106kPa ETSI 300 019-2-3
|
Ground
|
floating ground
|
USB
|
USB 2.0 is unavailable currently and will be supported through software upgrade in the future.
|
BLE
|
BLE5.2
|
Radio number
|
2
|
Operating frequency band
|
2.4GHz
|
5GHz
|
|
MIMO spatial streams
|
Radio 0 (2.4 GHz): 2x2
|
Radio 1 (5 GHz): 2x2
|
|
Wi-Fi standard
|
2.4 GHz: 802.11b/g/n/ax/be
|
5 GHz:802.11a/n/ac/ac Wave 2/ax/be
|
|
Radio interface
|
Built-in smart antennas
|
Antenna gain
|
2.4 GHz:
|
5 dBi/chain (peak gain)
|
|
2 dBi (combined gain)
|
|
5 GHz:
|
|
6 dBi/chain (peak gain)
|
|
3 dBi (combined gain)
|
|
BLE: 4 dBi (peak value)
|
|
Maximum transmit power
|
2.4 GHz:
|
20 dBm/chain
|
|
23 dBm (combined power)
|
|
5 GHz:
|
|
20 dBm/chain
|
|
23 dBm (combined power)
|
|
BLE: < 10 dBm
|
|
Singal radio transmit power [dBm]
|
2.4G: -10 dBm to 20 dBm/chain
|
5G: -10 dBm to 20 dBm/chain
|
|
MTBF [year]
|
113.48 year
|
MTTR [hour]
|
2 hour
|
Frequency stability [ppm]
|
+/-20
|
802.3bt power supply description
|
The power supply mode is negotiated to 802.3bt, and no function is restricted.
|
802.3at power supply description
|
The power supply mode is negotiated to 802.3at.
|
The USB port supports a maximum of 2.5 W output. Other functions are not restricted.
|
|
802.3af power supply description
|
The power supply mode is negotiated to 802.3af.
|
USB is not supported.
|
|
The uplink 2.5GE electrical port is degraded to GE, and all downlink GE electrical ports are shut down.
|
|
The maximum transmit power of radio 0 and radio 1 decreases by 3 dBm. The maximum radio bandwidth is 20M on the 2.4 GHz frequency
band and 80M on the 5 GHz frequency band. |
|
DC power supply description
|
No function is limited.
|
1.Table And Wide Supply Chain System
We have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
2.Competitive Price
We ensure the most competitive price.Warm reminders here, telecommunications equipment configuration is quite different, the price show
3.Safe And Easy Payment Solutions
We support a variety of payment methods, such as T/T, credit card, et
4.Strong Pre-Sales And After-Sales Services
To provide customers with professional pre- sales service, as well as after-sales technical Services
5.More Than 20 Years Industry Experience
We have been engaged in this industry more than 20 years, we have rich industry experience.
6.Fast Delivery And Shipping
Fast, professional and reliable delivery.
Q: How about your main products?
A:Our product lines include Switches.Routers,OLTs,SDHs. Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Email: Lilicheng0510@163.com