Enrutador de núcleo empresarial Netengine 8000 X4 02353cvy

• The chassis can be installed in a 19-inch standard cabinet with a depth not less than 1000 mm. A 1200 mm deep cabinet is recommended.
• By default,  A612 cabinet (2200 mm high x 1200 mm deep) is used. The cabinet BOM number is 02116153 (CR8B22A612C0).
• A610 cabinet (2200 mm high x 1000 mm deep) with a convex front door can be used. The BOM number of the cabinet is 02116078 (CR8B0A610E60).
• A  cabinet is recommended. If a third-party cabinet is used, the front door of the cabinet must be equipped with an air filter, but the rear door of the cabinet cannot be equipped with any air filter. (If an air filter is installed on the rear door, uninstall it.)

• 438 mm x 442 mm x 874 mm (17.24 in. x 17.40 in. x 34.40 in.) (dimensions of the chassis body)
• 438 mm x 483 mm x 985 mm (17.24 in. x 19.02 in. x 38.78 in.) (including the chassis front and rear decorating parts and cable tray)

4T bundle: 192.7 kg (424.8 lb)

14.4T bundle: 210.1 kg (463.2 lb)

5240 W (estimated value when LPUI-4T boards are fully configured)

8860 W (LPUI-14.4T boards are fully configured)

• AC: 200 V to 240 V
• HVDC: 240 V/380 V

• AC: 176 V to 290 V
• HVDC: 188 V to 400V

• AC: 16 A per module
• HVDC: 14 A per module

AC:

• UPS power distribution: two 16 A inputs per module, six PMs, twelve 16 A inputs in total
• Mains power distribution: two 20 A inputs per module, six PMs, twelve 20 A inputs in total

HVDC:

Two 16 A inputs per module, six PMs, twelve 16 A inputs in total

41.89 Tbit/s (4T bundle)

173.15 Tbit/s (14.4T bundle)