product Information
● Model No.: S6330-H48X6C
● size: 442*420*43.6mm
● Maximum power consumption [W]: 291
● Place of use: campus network cores or data center access layers
● Warranty: 1 years
● MOQ: 1 pieces
Introduction
Port configuration: 48 10G SFP+ports+6 40/100G QSFP28 expansion ports
Forwarding performance: packet forwarding rate of 1620Mpps, backplane bandwidth of 2.56/25.6Tbps
Main features: Supports VLAN, QoS, MAC address table 128K, supports multi rate transmission
Parameters
| Height [mm] | 43.6 mm |
| Depth [mm] | 420.0 mm |
| Wide [mm] | 442.0 mm |
| 1 | |
| 9.2 (20.28) | |
| 5.84 (12.87) | |
| 291 | |
| 165 | |
| 992.92 | |
| Air cooling and intelligent speed adjustment | |
| Typical heat dissipation [BTU/h] | 563 |
| Power supply mode | Pluggable power supply |
| Input voltage range [V] | - AC input: 90–290 V AC; 45–65 Hz - High-voltage DC input: 190 V DC to 290 V DC - DC input: -38.4 V DC to -72 V DC |
| Rated input voltage [V] | - AC input: 100 V AC to 240 V AC; 50/60 Hz - High-voltage DC input: 240 V DC - DC input: –48 V DC to –60 V DC |
| Maximum input current [A] | The current specifications depend on the pluggable power modules in use. For details, see the related power module specifications. |
| Number of power slots | 2 |
| Number of card slots | 0 |
| Memory | 4 GB |
| Flash memory | The physical space is 2 GB. You can run the display version command to view the actual available space. |
| Redundant power supply | 1+1 Pluggable AC and DC power modules can be used together in the same switch. |
| Types of fans | Pluggable |
| Noise at normal temperature (acoustic pressure) | 52 |
| Noise at normal temperature (acoustic power) | 65 |
| Airflow direction | Air intake from the front and air exhaust from the rear |
| Restriction on the operating temperature variation rate | When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). When the QSFP-100G-ER4 optical module is used, the operating temperature ranges from -5°C to +40°C (23°F to 104°F). |
| Long-term operating temperature | –5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.51 ft.) |
| Storage temperature | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
| Storage altitude | 0–5000 m (0–16404 ft.) |
| Long-term operating altitude | 0–5000 m (0–16404 ft.) |
| MTBF [year] | 56.87 |
| MTTR [h] | 2 |
| Availability | >0.99999 |
| Maximum number of physical ports on the entire device | 54 |
| Maximum number of 100GE ports | 6 (license required) |
| Maximum number of 40GE ports | 6 |
| Maximum number of 25GE ports | 0 |
| Maximum number of 10GE ports | 48 |
| Maximum number of GE ports | 48 |
| Maximum number of FE ports | 0 |
| USB | Supported |
| Console port | RJ45 |
| Eth Management port | RJ45 |
| Service port surge protection | - |
| Power supply surge protection | - AC power module configured: ±6 kV in differential mode, ±6 kV in common mode - DC power module configured: ±2 kV in differential mode, ±4 kV in common mode |
| RPS input | Not supported |
| PoE | Not supported |
Email: Lilicheng0510@163.com